Fabric: backing, red Canvas, double, 10-count Wool, tapestry Thread, sewing, coordinating Needle: tapestry; sewing Embroidery frameCushion pads, 38cm square, two; 38cm x 50cm
Rose and thistle cushions: 36cm squareRed dragon cushion: 36cm x 48cm
Make a cushion
Find the colours of wool needed. Then download the tapestry charts and print. Cut the tapestry canvas at least 10cm larger all round than the size of the finished design and place in an embroidery frame.
Measure and mark the centre of the fabric by sewing a line of running stitch along the horizontal and vertical axis, dividing the fabric into four quarters. This will help when following the charted design.
Start working from the centre of the design outwards. Thread a tapestry needle with a strand of wool in the appropriate colour and bring the needle from the back to the front of the work. Leave a short length of yarn at the back and make sure you trap this tail under the first few stitches to secure.
Following the chart and working in tent stitch, make one stitch for every coloured square (or symbol) on the chart, ensuring that all stitches lie in the same direction. Once you have completed the central part of the design, work the background. Add two or three extra rows all round in the background colour.
Remove the finished work from the frame. You will see that it is slightly distorted. To get it back into shape, you will need to block it. To do this, place it right side up on a rigid board, slightly larger than the fabric, and spray all over with clean water. Pin it to the board with drawing pins, placing one in the centre of each side, just outside the line of stitches. As you do this, pull the fabric slightly, to make sure each corner is a right angle. Add more pins, working from the side centres towards the corners.
Once all the edges have been pinned, leave the work to dry completely; this can take a number of days. When your needlepoint is dry, remove the pins and trim the canvas, leaving a 2.5cm margin all round.
For the rose and thistle cushions, cut a 38cm square of backing fabric. Then cut two 10cm x 22cm and two 10cm x 38cm rectangles. Pin and sew the longer rectangles to the sides of your canvas, right up to the stitching, and the shorter ones across the top and bottom. Place right sides together on the backing fabric, trim to exactly the same size, and pin.
For the dragon, cut a 38cm x 50cm rectangle of backing fabric. Then cut two 10cm x 35cm and two 10cm x 38cm rectangles. Pin and sew the shorter rectangles to the sides of your canvas and the longer ones to the top and bottom. Place right sides together on the backing fabric, trim to exactly the same size, and pin.
Stitch all round, close to the edge of the stitching on three sides, leaving one open. Clip the corners and turn right sides out. Place a cushion pad inside, tuck in the raw edges and slip stitch together to close the gap.