Reindeer Sack – Free sewing patterns


Fabrics, cotton (110cm): spot, 50cm; gingham, 50cm ; star print, 15cmFelt: browns, four; pale pink, red, cream, glitter white Velvet pom-pom trim Gingham ribbon

Download the templates from and print out. Cut two strips of print fabric, 12cm x 50cm. Pin to each short end of the spot material, right sides together. Join with a 1cm seam allowance, then iron on the reverse.

Snip out all of the main face pieces in felt: use mid-brown for the face, caramel for the antlers and inner ears, white and dark brown for the eyes, pale pink for the cheeks and cream for the main muzzle.

Fold the sack in half, wrong sides together, and mark the bottom fold line, then unfold to pin to the front only. Set the muzzle piece aside and use the photo as a guide to position and pin the other reindeer layers centrally.

Machine-stitch the pieces in place with matching threads. Pin and sew the eyes layers in place, then outline in dark brown thread. Position the cream muzzle to slightly overlap the face, as shown on the template. Pin and in dark brown thread, stitch around the edge, then add the smile.

For the moustache, snip a piece of light brown melange felt, slightly larger all round, and pin in place. Trace the outline onto tissue, pin it in place, then machine-stitch over the lines using dark brown thread. Tear the tissue away and trim the felt close to the stitches.

Cut out the nose in red felt and attach with contrast thread. Trim one large and two small snowflakes from white glitter felt and attach securely to the front. Sew straight lines in dark thread to ‘hang’ them from the antlers. Iron on the reverse using a mid to low heat.

Make up the sack by folding it in half, right sides together, aligning the top raw edges of the print fabric. Pin down each side and join with a 1cm seam allowance. To make the lining, repeat step 1 with gingham and print fabrics. Fold the lining in half, right sides together, pin each side and stitch with a 1.5cm seam allowance.

With right sides together, insert the sack outer inside the lining and pin together around the top edge of the print fabric. Sew a 1cm seam all around the top, leaving a 15cm gap for turning through. Turn the sack right side out, then push the lining inside. Close the gap and topstitch along the edge in matching thread. Starting at the middle of the back, machine-sew the pom-pom trim around the fabric join.